No, log burners are not going to be banned in the UK, but new regulations have been introduced to reduce emissions. Since January 1, 2022, new wood burning stoves must meet Ecodesign regulations to reduce emissions. These regulations are part of the UK government's Clean Air Strategy, which aims to reduce air pollution and reach net-zero carbon dioxide emissions by 2050. The range of stoves found at Kent Fireplace are all compliant with current UK legislation.

Initially, you may wish to call our showroom to speak with one of our experienced advisors on 0208 466 5910. Depending on your enquiry, if you can provide some initial measurements and photos this will give us the details we need to assist you. Click here to complete our enquiry form.

Yes. Older houses (pre 1965) generally have 'Class 1' brick built chimneys which can accommodate most types of fires and fireplaces. However, after this date 'pre-cast' chimney systems were installed to many properties and only Class II gas fires are suitable which are very shallow in depth as inset fires. These can only be installed at hearth level and not as hole-in-the-wall type installations.

Class 1 chimneys built after this time were constructed with pre-fabricated liners and gather units which are not often suitable for hole-in-the-wall type designs as the gather units have been sited for a hearth mounted fire and major structural work is required to alter this.

If your property is built after the mid 1960's try to find out as much information as you can on the chimney, even take a photo looking up the chimney as this can sometimes give us the information we need to help you.

Fireplace installations can be both complex and potentially dangerous. We strongly advise that you use only accredited installers who are able to issue the appropriate certificates you need when you eventually sell your property. Gas Safe engineers are required for gas installations and Hetas registered engineers for all wood & solid fuel installations. Kent Fireplace is able to offer a full installation service with its own Gas Safe and Hetas registered engineers for your convenience.

The good news is yes! There are a wide range of electric fires on the market today but in some circumstances, you can even have a balanced flue gas fire. As the options available are specific to your property, please reach out to us to discuss your requirements further.

Yes! A large proportion of our fireplaces are made to measure to suit customer's requirements. At our showroom you'll also find examples of our own designs that you won’t find elsewhere!

In most instances yes! For gas installations it is a legal requirement for the Gas Safe installer to inspect the flue and ensure it is clear. Flues can get blocked from birds nests and even cobwebs that can slow down the flue draught therefore sweeping ensures that they are free from blockages. On straight flues you may be able to see that it is clear right up to the open pot but for most older chimneys with a ‘dog leg’ bend this isn’t possible. We ask customers to have their chimneys swept and the certificate available on the day of installation to confirm this.

We do recommend installing a cowl – usually a Bird & Rain Guard. It is definitely recommended for all glass fronted and convector box type fire installations as you cannot sweep through these appliances – they need to be removed for sweeping therefore it could be costly if a bird were to get down the chimney.

Bromley and most of the surrounding areas are in a Smoke Controlled Zone and only smokeless fuel can be burned on open fires in these areas otherwise you may receive a fine of up to £1000. You can contact your local Council to confirm whether you are in a Smoke Controlled Zone or not.

There is a wide range, however, of 'Exempt' appliances that have been tested and certificated to choose from including traditional and modern log burners and inset, glass fronted fires.

Most gas appliances are required to have an annual service to adhere to the manufacturer’s warranty requirements. We are able to offer gas fire servicing to those fires that we have installed previously. We do not currently offer servicing for electric or log/multi fuel appliances but if you contact the manufacturer they may have their own service engineers or be able to direct you to a local company that can do this for you.